The Chelmer concrete works created bases and connecting ground beams within an existing building footprint. The archive records reinforcement in open forms, cast concrete beside the retained structure and steel columns fixed to individual bases.
The important relationship is between the foundation geometry and the frame above. A column base needs to arrive in the right position and at the right level, while the connecting concrete has to fit around the surrounding walls and working space.
Forming the below-ground layout
Long narrow runs of reinforcement define the ground beams. At their ends and junctions, larger concrete bases provide the support points for the steelwork. Timber shutters and the existing excavation establish the boundaries of the new concrete.
The sequence begins with setting out those positions and preparing the formation. Reinforcement then has to be supported and connected through the required intersections. Before pouring, the relationship between the beam runs, bases and column positions needs to be checked as a whole.
Preparing the steel-column interfaces
One close view shows a column base plate and its holding-down bolts on a concrete pedestal. This is a small detail within the wider site, but it is central to bringing the frame into alignment.
Bolt positions, pedestal level and the intended bearing arrangement need to be coordinated before the steel is installed. Once the concrete is in place, adjustments are more restricted. The photographs of both empty bases and erected columns make the progression easy to follow.
Working within the retained building
Existing walls enclose the construction area, and steel members are stored close to the new work. That limited space affects excavation, reinforcement assembly and access for concrete. The work needs an order that allows the next operation to proceed without obstructing the one already under way.
The gallery follows that transition from reinforced foundations to supported steelwork. It demonstrates how a foundation package becomes part of a larger structure, with the accuracy of the early concrete controlling the alignment of the frame that follows.
You can explore our approach to formwork and reinforcement in Essex and Suffolk on the relevant service page.
ON SITE · IN DETAIL
Project gallery
Project setting, working details and the construction stages available in the archive.
12 photographs · Select a photograph to enlarge it.












