CONSTRUCTION GUIDE · Renovations & repairs
Repointing older brickwork: match the building, not just the colour
Published · Reviewed 17 September 2026

Mortar joints occupy a surprisingly large part of a brick wall’s appearance. Their colour, texture and profile can change the character of a facade, but visual matching is only one consideration. A repair also needs to work with the existing bricks and the way the wall manages moisture and movement.
Decide whether repointing is needed
Begin by identifying the defect and its cause. Local erosion around a leaking downpipe may call for a different scope from widespread failed joints. Sound historic mortar should not be removed simply to make an elevation look uniformly new. Historic England’s repointing guidance explains why comprehensive repointing is rarely necessary and why unsuitable work can damage masonry.
Look beyond the joints. Bulging, leaning, significant cracking or fractured masonry may require structural assessment. Repointing should not be used to disguise movement that has not been understood. Rainwater defects and inappropriate later repairs can also need attention before the wall is refinished.
Specify compatibility rather than a standard mix
The repair mortar should be selected by someone who understands the existing construction, exposure and materials. A recipe suitable for modern masonry is not automatically suitable for softer historic brickwork. Lime-based repairs may be appropriate in older buildings, but lime is a broad category rather than a complete specification.
Avoid choosing solely by the colour of a wet sample or by a claim that the hardest material lasts longest. Ask how the proposed mortar relates to the original fabric and what preparation, application and protection the specification requires. Listed status and other heritage controls should be checked before work is agreed.
Use a representative trial area
Agree a small sample in a suitable location before extending the work across the elevation. Review the joint profile, texture, brick edges and appearance after the sample has had time to develop. Keep a record of the approved materials and method so the finished work has a reference.
A sample also helps discuss reasonable variation. Older masonry is rarely perfectly uniform. An overly crisp, consistent finish can look out of place even if the chosen colour appears close. The aim is a compatible repair that respects the building’s character, not a surface that resembles new imitation brickwork.
Plan access, weather protection and follow-up
Access arrangements should allow careful work without avoidable damage to the facade or surroundings. The method should account for conditions during application and curing. Discuss how fresh repairs will be protected and how adjacent windows, planting and paths will be kept clean.
At completion, record the areas repaired and any issues that remain under observation. Historic England’s advice on repairing older walls is a useful companion when considering masonry defects and appropriate specialist input.
For building repairs and renovations, share photographs of the whole elevation as well as close-ups of the joints. The wider context often helps explain why one patch has deteriorated while the rest of the wall remains sound.
Guidance reviewed on 17 September 2026. Requirements and suitable construction details depend on the property and project; follow the applicable regulations and your appointed specialists’ advice.
