Skip to content

CONSTRUCTION GUIDE · Renovations & repairs

Construction dust control starts with the method of work

Published · Reviewed 17 September 2026

Saw and dust extraction equipment in a refurbishment area
Illustrative image.

Dust is more than an inconvenience that can be dealt with by a final clean. Cutting, drilling and grinding can generate hazardous airborne material, while dust migration can disrupt occupied rooms and sensitive equipment. A good refurbishment plan tackles the source and the work method before relying on barriers or personal protection.

Identify the tasks that generate exposure

Review the actual operations and materials: cutting masonry, chasing walls, sanding and floor preparation may have different control needs. Consider whether the design or procurement can reduce cutting on site, or whether a different method can avoid part of the disturbance. The assessment should reflect the task, location and duration.

HSE’s construction dust guidance sets out the need to prevent or adequately control exposure. A clean-looking room is not proof that the air is safe, and an ordinary face covering is not a substitute for a properly assessed control system.

Match equipment to the operation

Where extraction or suppression is used, the equipment and setup must suit the work. Ask how tools, extraction and maintenance will be managed together. A hose attached to a machine does not establish that the complete arrangement is effective, and damaged or neglected equipment can undermine the intended control.

Some tasks may also need suitable respiratory protective equipment, with the relevant selection, fit and training requirements. Those decisions belong in the contractor’s assessment. The client should look for a coherent method rather than trying to prescribe equipment from a catalogue.

Consider people outside the work area

On an occupied site, define the boundary between construction and normal use. Discuss ventilation systems, routes through the building, deliveries and waste removal. A temporary partition may need more coordination than its appearance suggests, particularly where doors are opened repeatedly or building services connect the areas.

For example, grinding a floor beside an operating office creates a different interface from the same task in an isolated empty unit. HSE’s guidance on scabbling and grinding highlights the high dust potential of those operations. Programme and separation should be considered alongside the task controls.

Plan cleaning and reoccupation

Agree how dust and debris will be removed without creating unnecessary further exposure. The method should address equipment, protective coverings and the route out of the building. A final cosmetic clean is not a replacement for controlling emissions during the work.

Set clear criteria for handing an area back to occupants, with any specialist verification required by the work. Explain who will inspect the separation measures while the job is underway and how complaints or unexpected dust migration will be handled. A practical reporting route lets the team respond before disruption spreads.

CJC’s refurbishment service can be planned around access and occupation constraints. Tell us which spaces must remain operational and what sensitive activities or equipment need to be considered when defining the construction sequence.

Guidance reviewed on 17 September 2026. Requirements and suitable construction details depend on the property and project; follow the applicable regulations and your appointed specialists’ advice.