Skip to content

CONSTRUCTION GUIDE · Renovations & repairs

Insulation in refurbishment: pay attention to the junctions

Published · Reviewed 17 September 2026

Insulation fitted between timber roof members
Illustrative image.

Insulation is easy to compare as a product and harder to coordinate as part of a building. A wall, roof or floor has edges, openings and connections to other elements. Those junctions can affect both heat loss and how the finished space performs, so the design needs to extend beyond the middle of a typical section.

Establish the existing construction

Identify how the building is put together before choosing an upgrade. Solid walls, cavity walls and timber-framed elements need different consideration. Check the condition of the fabric, any moisture problems and previous alterations. Insulation should not be used to conceal a defect that still needs repair.

The Energy Saving Trust’s explanation of heat loss describes the role of U-values in assessing a building element. Product performance is relevant, but it should be interpreted within the actual build-up and installation, not treated as a promise of a particular household bill saving.

Draw the difficult details

Ask how the insulation continues around windows, at eaves, beside floors and where an extension joins the original house. A thermal bridge is a local route for greater heat flow through or around the insulation layer. The designer should consider those locations together with moisture and surface-temperature risks.

Practical constraints may drive the detail. Internal insulation can affect room dimensions, sockets and window reveals. Roof upgrades can interact with ventilation paths and existing timber. Floor insulation may change thresholds and stair relationships. Resolving these effects on paper gives the trades a coordinated arrangement to build.

Coordinate airtightness and ventilation

Reducing unintended leakage and providing adequate ventilation are related design tasks. Do not simply block every opening found during work. Some openings or cavities have a deliberate function, and changing them without understanding the construction can create problems.

The Energy Saving Trust’s window and door guidance highlights ventilation alongside energy-efficient glazing. When several measures are being installed together, ask who is responsible for checking their combined effect. Separate trades may each complete their own task correctly while the overall arrangement remains unresolved.

Inspect before covering up

Agree the stages at which installation can be reviewed. Gaps, poorly fitted sections or an interrupted air barrier are easier to identify before boards, plaster and finishes conceal them. Photograph key junctions with enough context to show where they are, and retain the approved details with the records.

Avoid changing insulation products purely on availability without checking the implications for thickness, fire performance, moisture behaviour and installation. A substitute can affect more than the thermal calculation. The designer should approve changes that alter the specified assembly.

For refurbishment and renovation enquiries, bring the proposed energy improvements into the initial scope. Coordinating them with repairs, services and finishes can make the work more coherent than adding them after the main construction decisions have already been made.

Guidance reviewed on 17 September 2026. Requirements and suitable construction details depend on the property and project; follow the applicable regulations and your appointed specialists’ advice.