Skip to content

CONSTRUCTION GUIDE · Drainage

What a drainage survey should tell you before building work starts

Published · Reviewed 17 September 2026

Drain inspection camera beside a closed access cover
Illustrative image.

A drain that appears to work during a viewing may still be an important constraint on a building project. Its route, level, ownership and condition can affect foundations, floor layouts and the position of new bathrooms. A useful drainage survey answers design questions; a video recording on its own may not provide the information the project needs.

Define the reason for the survey

Tell the surveyor what is proposed. Investigating a recurring blockage requires a different emphasis from planning a rear extension or adding a commercial kitchen. Provide drawings and explain where new foundations, paved areas and appliances are expected. Ask what access is needed and whether cleaning may be required before inspection.

Agree the deliverables in advance. These may include a plan of inspected runs, chamber references, recorded defects, accessible levels and clear identification of anything that could not be surveyed. The designer needs to know which details were measured, which were inferred and where further investigation remains necessary.

Separate condition from suitability

A pipe can be in reasonable physical condition without being suitable for a proposed connection or altered layout. A camera survey also does not, by itself, establish hydraulic capacity, legal ownership or permission to build over a sewer. Those questions need to be resolved with the appropriate designer and, where relevant, the sewerage undertaker.

Drainage requirements sit within the building regulations framework. The Approved Document H guidance page provides access to the England guidance on foul and surface water drainage. Use the applicable guidance alongside site-specific advice rather than choosing a connection simply because it is closest.

Translate the report into a coordinated scope

Review the drainage findings with the foundation and floor layouts. Check whether chambers remain accessible, whether proposed levels are compatible and whether a diversion affects other work. Resolve how temporary drainage will operate if an occupied building must stay in use during the alteration.

For example, moving a kitchen can introduce an inconvenient pipe route through an existing floor. Identifying that early may lead to a better layout or a planned opening-up exercise. Discovering it after the floor finish has been ordered narrows the choices and can increase disruption.

Record limitations and close them out

An inaccessible chamber, standing water or a blocked run may limit what the survey proves. Put each unresolved item on the project action list with an owner and a decision date. Avoid treating a report’s completion date as evidence that every drainage question is settled.

After repairs or new installation, agree the appropriate inspection and testing records, updated routes and maintenance information. Photographs taken before backfilling can complement those records but do not replace required tests or inspections. Keep the final information somewhere that a future owner or facilities manager can find.

CJC’s drainage services include work around existing buildings and external areas. Sharing a survey report with the initial enquiry helps connect the visible problem with an informed construction scope.

Guidance reviewed on 17 September 2026. Requirements and suitable construction details depend on the property and project; follow the applicable regulations and your appointed specialists’ advice.