Skip to content

PROJECT STORIES · DRAINAGE INSTALLATION AND REPAIRS

Volvo garage, Severalls: workshop floor and drainage

From the CJC project archivePublished

Workshop floor reinforcement and formed openings at Volvo garage, Severalls

The Volvo garage project at Severalls combined internal floor construction with drainage work outside the workshop. The gallery records the floor opened up, reinforcement assembled around defined openings, membrane preparation and below-ground drainage equipment before reinstatement.

The connection between those work areas is the important part of the story. A workshop floor is both a working surface and the cover over structural and service details. Those details have to be coordinated before the concrete closes the space and makes access more difficult.

Reconstructing the workshop floor

Inside the building, the prepared area includes rectangular formed zones surrounded by reinforcement. Timber shutters define the boundaries, while projecting steel and changes in the arrangement indicate that the floor is being constructed around specific features rather than as a plain uninterrupted slab.

The geometry needs to be settled before pouring. Openings, equipment interfaces and adjoining floor levels all influence the set-out, although the precise function of each formed zone is not identified in the archive. The visible work demonstrates the need to bring reinforcement and formwork together as one coordinated assembly.

Preparing the adjoining slab area

Other views show a dark membrane across an opened section of floor. The edges meet the existing building and the surrounding concrete, creating junctions that need attention before the new floor build-up is completed.

For work within an established workshop, preparation also includes managing the boundary between new and retained construction. The remaining slab edges need to be suitable for the intended connection, and the work area needs to remain clear enough for placing and finishing. The final surface depends on the levels established during this less visible stage.

Installing drainage below ground

Outside, blue chamber units and connected pipework sit within an excavation. Several angles show the relationship between the units, the surrounding ground and the connections entering the system. The equipment's exact specification is not recorded, so the case study focuses on the installation visible in the photographs.

Before backfilling, the units need the support and surround required by their design, with pipe connections and access positions checked while exposed. The subsequent ground and floor reinstatement then has to protect the installation and preserve access where maintenance is required.

This project demonstrates why internal concrete work and external drainage often need to be planned together. The finished workshop can conceal most of the construction, but the full gallery gives a clear account of the structural preparation and service installation beneath it.

Our drainage installation and repairs in Colchester service covers the practical work behind projects like this.