CJC CONTRACTS · GREAT HORKESLEY, COLCHESTER
Drainage contractors in Essex
New drains, laid to fall. Built to the approved design.
We work as drainage contractors in Essex on planned jobs: new foul and surface-water drainage, chambers, attenuation and repairs, usually alongside an extension, new build, refurbishment or external works. Connections are confirmed with your designer and the sewerage company.
Established 2007 · Domestic & commercial construction

DRAINAGE ACROSS ESSEX
Below-ground drainage built to the design and the approvals
If you are comparing drainage contractors in Essex, it helps to know where we fit. We install new foul and surface-water drainage, carry out planned alterations and repairs, and do the excavation, chambers, backfill and reinstatement that go with them, usually as part of a wider building or external works job. We don’t unblock drains, offer a 24-hour callout or carry out CCTV surveys, so for a blocked pipe or a camera survey a specialist drain service will suit you better.
Two sewerage companies serve the county. Anglian Water owns the public sewers across most of Essex, including Colchester, Chelmsford and the south Essex towns, while Thames Water serves Harlow, Epping Forest district, the Brentwood town catchment and south-west Uttlesford around Stansted Mountfitchet. Your water supplier may be a different company again; in Southend, for example, Essex & Suffolk Water supplies the water but the sewers are Anglian’s. For surface water, Essex County Council is the lead local flood authority, except in Southend-on-Sea and Thurrock, which are unitary authorities and act as their own.
Our published drainage work runs across the county. At Colchester Hospital we installed a below-ground attenuation tank for the hospital’s surface-water drainage, and carried out drainage and service preparation for a substation, with paving and surface reinstatement. On Severalls, at a Volvo garage, we put in new chambers and pipework outside a reinforced workshop floor. At The Meadows in Harlow we investigated chambers, service routes and roof-water details and carried out repairs around them, and at Stansted Mountfitchet we broke open a surfaced area to follow below-ground water and drainage before reinstating it.
DRAINAGE CONTRACTORS
Drainage work we take on
New foul drainage
New foul drains from kitchens, bathrooms and new buildings to the connection point, laid to the designer’s falls with inspection chambers and access where the drawings show them. Connections are confirmed with the designer and the sewerage company.
New foul drainageSurface water and attenuation
Roof and yard drainage, soakaways where tests allow, and below-ground attenuation with flow controls where they don’t. At Colchester Hospital we installed an attenuation tank as part of the site’s surface-water drainage.
Surface water and attenuationDrainage for extensions
New runs, altered branches and chambers for house extensions, planned with the build so the drainage goes in before the slab. If a public sewer runs within 3 metres of the new walls, the build-over check comes first.
Drainage for extensionsNew-build site drainage
Foul and surface-water networks for new houses and small developments, built to the approved drawings. Where the sewerage company is to adopt the sewers, a section 104 agreement governs the build, and the pipes are inspected and signed off first.
New-build site drainageExcavation, chambers and backfill
Trench excavation and support, pipe bedding, chambers, backfill and compaction, coordinated with the foundations, slabs and other groundworks on the same site so that trench routes, chamber positions and slab levels line up.
Excavation, chambers and backfillRepairs and reinstatement
Planned investigation and repair where existing drains are opened up during works, then reinstatement of paving and surfacing. At Longshaws in Waltham Abbey, broad external surfacing took in kerbed islands, paths and chamber details next to the building.
Repairs and reinstatementFROM THE PROJECT ARCHIVE
Drainage work across Essex
Investigation, repairs and new below-ground drainage from our published projects, on hospital, commercial and housing sites.

Colchester
Colchester Hospital: attenuation tank installation
Installation of a below-ground attenuation tank as part of the hospital's surface-water drainage.
Read the project story
Colchester
Colchester Hospital: substation drainage and paving
Below-ground drainage and service preparation for a substation, with paving and surface reinstatement.
Read the project story
Severalls, Colchester
Volvo garage, Severalls: workshop floor and drainage
A reinforced workshop floor with membrane inside, plus new drainage chambers and pipework outside.
Read the project story
Harlow
The Meadows, Harlow: drainage investigation and repairs
Investigation and repairs around drainage chambers, service routes and roof-water details.
Read the project story
Stansted Mountfitchet
Stansted Mountfitchet: drainage investigation and reinstatement
Opening up a surfaced area to trace below-ground water and drainage, then reinstating it.
Read the project story
Waltham Abbey
Longshaws, Waltham Abbey: surfacing and drainage details
Broad external surfacing with chamber details, kerbed islands and paths beside the building.
Read the project storyBEFORE YOU START
Drainage in Essex: what to check
The 2011 private sewer transfer
The 2011 adoption regulations moved private sewers and lateral drains that were already connected to a public sewer at 1 July 2011 into the sewerage companies’ ownership on 1 October 2011, with some exemptions; private pumping stations followed by October 2016. Anglian Water’s guidance says owners of transferred drains stopped being legally or financially responsible once the pipe leaves their boundary. Drains built and connected after 1 July 2011 are only adopted through a section 104 agreement, so a new shared run on a development stays the owner’s or developer’s responsibility unless it is adopted.
Connections, adoption and building over sewers
Before connecting to a public sewer, section 106 of the Water Industry Act 1991 requires notice to the sewerage company, which has 21 days to refuse on grounds of the drain’s standard or condition; surface water needs its approval to enter a foul sewer. Thames Water asks for a build-over agreement when work to an existing property comes within 3 metres of its public sewer, or within a metre of a public lateral drain. Anglian Water’s eight standard criteria let simpler cases proceed without applying, and Approved Document H expects the owner’s permission to build over, or within 3 metres of, sewers more than 3 metres deep or above 225mm.
Soakaway tests and the Essex SuDS guide
Approved Document H keeps infiltration devices at least 5 metres away from buildings and roads, and sends larger soakaway designs to BRE Digest 365. On major schemes, Essex County Council has advised on surface water as a statutory consultee since April 2015, and its SuDS guide asks for BRE 365 testing that mirrors the proposed design’s location, depth and head of water, with three consecutive tests in each pit. It rejects formal infiltration below 1×10⁻⁶ m/s and expects the bottom of a soakaway to sit a metre or more above the highest groundwater level.
Watercourses, clay and chalk
Plenty of Essex sites drain to ditches and streams rather than sewers. Piping, culverting or otherwise altering an ordinary watercourse requires Section 23 Land Drainage Act consent, a separate application from planning; Essex County Council grants it, or Southend-on-Sea City Council and Thurrock Council in their own areas. Ground conditions then decide what infiltration is realistic. South Essex flood studies find London Clay limits soakage over much of that area, while for chalk, which surfaces near Saffron Walden, the county guide asks for a 5 metre gap between soakaways and structures, roads or railways, widening to 10 metres where the chalk is low density.
Checked October 2026 from council, water company and government sources. Rules and services change, so confirm the details for your address before you start.
AREAS COVERED
Essex and around
We work across the county from our yard near Colchester. Places we regularly cover include:
- Colchester
- Chelmsford
- Harlow
- Stansted Mountfitchet
- Waltham Abbey
- Epping
- Brentwood
- Basildon
- Southend-on-Sea
- Braintree
- Witham
- Maldon
- Clacton-on-Sea
- Saffron Walden
- Great Dunmow
- Billericay
RELATED PAGES
HOW A PROJECT RUNS
From first call to handover.
- 01
Talk it through
Tell us what you want to build, where it is and what drawings or approvals you already have.
- 02
Visit and price
We look at the site, the access and the ground, then price the work from the drawings and specification.
- 03
Plan the build
We agree the programme, deliveries and any inspections, and who does what where other trades are involved.
- 04
Build and hand over
We run the work through to completion, with building control inspections at the stages the job needs them.
YOUR QUESTIONS
Drainage in Essex: common questions.
Can’t see your question? Call us on 01206 273689.
Do you work as drainage contractors in Essex outside Colchester?
Yes. Essex and Suffolk are our working area, reaching out to the edges of London but rarely beyond, and we run it all from Great Horkesley, just north of Colchester. Published drainage jobs include Colchester Hospital, a garage on Severalls, The Meadows in Harlow, Stansted Mountfitchet and Longshaws in Waltham Abbey, so sites from the north-east of the county to the London fringe are within reach.
Do you unblock drains or come out in an emergency?
No. We are not an emergency drain-unblocking service, we don’t run a 24-hour callout and we don’t carry out CCTV surveys. Our drainage work is planned: new foul and surface-water drainage, and alterations or repairs, usually as part of an extension, refurbishment or external works. For a blocked drain today, a specialist unblocking company is the right choice; if the fix turns out to need building work, we’re happy to price it.
Do I need the sewerage company's permission to connect a new drain?
Not permission as such, but notice. Section 106 of the Water Industry Act 1991 gives you a right to connect to a public sewer once you have told the sewerage company, Anglian Water or Thames Water depending on the area; the company then has 21 days to refuse if the drain isn’t up to standard or would harm its system. Surface water into a foul sewer needs its approval. Connection details are confirmed with your designer and the company before we dig.
Why can't my rainwater simply go into the sewer?
Because Approved Document H puts the sewer last. Rainwater should go to a soakaway or other infiltration system where that is reasonably practicable, then to a watercourse, and only then to a sewer. On heavy clay, tests can show too little soakage, which is what moves a design down the list. Essex’s SuDS guide adds rainwater re-use at the top, and asks for evidence of agreement before a design relies on an off-site sewer or watercourse.
Who is responsible for the drain that runs under my garden?
It depends on what it serves and when it was connected. Private sewers and lateral drains linked to the public network by 1 July 2011 became the sewerage company’s that October, and for those, Anglian Water’s guidance puts the owner’s responsibility at the property boundary. Drains connected later stay private unless adopted under a section 104 agreement. Check the company’s sewer records before an extension, because a shared sewer nearby can bring in build-over rules.
START WITH THE BRIEF
Drainage work in Essex?
Send us the site postcode, a short description of the work and any drawings you have. We’ll come back to you to talk it through and arrange a site visit where it’s needed.
CJC Contracts Ltd · The Mullions, Nayland Road, Great Horkesley, Colchester CO6 4HH
Request a no-obligation quotation
Fields marked * are required.
We’ll use your details to respond to your enquiry.
